Microcontrollers, Embedded Systems, and STM32.
▶Kindly consider supporting me: https://www.thehardwareguy.co.uk/membership
Microcontrollers and Embedded Systems Explained
In this video I talk to you about microcontrollers and embedded systems. I cover what microprocessors are, where microprocessors are found and how they can be used in your own projects. I also discuss the STM32F4 Discovery & STM32 Nucleo-64 development boards and provide my thoughts on why the STM32 is a better choice than an Arduino.
STM32F401 Nucleo-64: https://uk.rs-online.com/web/p/microcontroller-development-tools/8029425/
STM32F407 Discovery: https://uk.rs-online.com/web/p/microcontroller-development-tools/9107951/
00:00 Intro
01:02 Microcontrollers on Development Boards
01:25 What are Microcontrollers?
02:29 What classifies as an Embedded System?
04:17 Peripherals
05:36 Why use development boards?
06:19 Arduino Boards
06:54 STM32 ARM Cortex Boards
09:10 How can we use Microcontrollers?
09:51 Simple LED circuit
10:32 Programming Microcontrollers
10:54 Microcontroller LED Flash (Hello World)
11:10 Why Microcontrollers are Awesome
11:36 Outro
#stm32 #microcontroller #hardware
Sign up for my newsletter: https://www.thehardwareguy.co.uk/subscribe
Where I get my Music (Awesome for Creators): https://www.epidemicsound.com/referral/izrle2/
—————————————————————————————-
▶My Links:
Website: https://www.thehardwareguy.co.uk
Instagram: https://www.instagram.com/hardwareguy_
Thingiverse: https://www.thingiverse.com/thehardwareguy
—————————————————————————————-
Hi dear. I’d love you to give the manner or advice so that I can understand STM32 because when I see a code HAL I panicked suddenly. Best regards 😢
good videos
matrix
Vote it up, nice video clip, thank you for sharing it 🙂
wahoo so you can write your own C program to give instruction to the MC, i thought everything was set in advance. that make it interesting
This was very helpful, thanks very much! ✨
Great Video thanks sir
What is the different between firmware and software driver in a microcontroller? Do they are different, or just they are just same meaning?
You said one was a F4 chip… these are the same chips that F4 drone controller boards are based on…? I wonder then if could just adapt one of these controllers for r/c, as they seem to have way enough power for flight 🤔😉
how to do threads inside and outside pipe thread fine and course?
I am not into all these electronic and technical things and often are too hard for me to understand,but this was explained so straightforward! Thankyou so much
Will you use CubeIDE?
Please teach us DMA too!
❤👌👍
Today i found you on instagram and then visited your YouTube channel and became your fan ❤️ , you really inspired me 🙂
I’m very hyped for this!
Just wanted to thank you for delivering amazing content. You’ve also inspired me to produce my own content as an engineer (still a student). Really appreciate what you do 🙂 Please don’t stop!!
Made a similar switch away from Arduino to STM32 last year, the mcus are so much more capable. CubeMX (Eclipse) is a much better IDE too.
Thanks for stressing these are development boards. More attention needs to be drawn to the fact these boards are for testing and development. It’s frustrating reading about projects that have a whole Arduino UNO board left in when the parts they actually need would be way cheaper to use on their own.
Can you cover content specific to C/C++ programming for STM32? For example, using the CubeIDE and the pros/cons of C vs C++ for hardware projects? Thanks!
Please Continue STM32 Series with some projects thank you
Wow i did not know you were into electronics too . Your freecad videos have really helped me. thanks
If smartphones aren’t embedded systems, then what are they?
Good explanation 🎉🎉
The N1
is stem 32 better or stem 64
I’ve been messing with electronics for over 40 years and you have one of the best deliveries of of content and an excellent way of explaining concepts i have seen in many years. Very good job , keep it up.
I believe peripherals are those iOS which are connected to microprocessor and results into microcontroller. For example ADC, DAC, PWM, I2C, SPI, UART, CAN, etc..
Great stuff Sir!
You’re freecad tutes are easily the most articulate and understandable videos on the subject.
I’m really looking forward to the microcontroller series.
Very nice
huge thanks
thank you
I have to buil a college project on IOT solution for elderly care and I need to come up with new idea……..plz help me out
Thank u
I really got an idea on a micro controller. Thanks to you!!!
Great content man!