HOW TO USE A 858D HOT AIR REWORK STATION – MOD MONDAY EP5
On today’s Mod Monday, I show you how to use a 858D hot air rework station. Great for removing surface mount components on PCBs, applying heat shrink, and fixing cold solder joints! DON’T GET BURNED, watch my tutorial!
***Buy it on Amazon***
858D Rework Station – http://geni.us/858D
Weller WLC 100: http://geni.us/wlc100
TrakPower Rosin Core Silver Bearing solder: http://amzn.to/2hhlN9i
Helping Hands with Magnifying Glass: http://geni.us/helpinghands
New to soldering? Watch my beginners guide to soldering
Need tools? This will help you get started
IFIXIT essentials toolkit: http://geni.us/ifixitessentials
*****Check out my Amazon store for more products*****
http://www.amazon.com/shop/immoddernation
***Follow Me on Social Media***
http://www.youtube.com/ImmodderNation
http://www.facebook.com/ImmodderNation
Tweets by ImmodderNation
http://www.instagram.com/ImmodderNation
http://www.twitch.tv/ImmodderNation
The equipment used to record this video are listed with Amazon Affiliate links below. Purchasing items using the supplied link helps me to bring you better content every week.
Canon Rebel T5i – http://geni.us/rebelt5i
Logitech C920 Webcam – http://geni.us/logc920
Canon EFS 18-55mm Zoom – http://geni.us/efs1855mm
Canon EFS 24 mm F/2.8 – http://geni.us/efs24mm
Rode Videomic – http://geni.us/rodevidmic
Audio Technica AT2020 – http://geni.us/at2020
Alesis Multimix 4 USB – http://geni.us/alesismultimix4
ePhoto 2000w Softbox Lighting Kit – http://geni.us/ephotostudiolighting
Bayco 150w Incandescent Portable Clamp Light – http://geni.us/baycoalumreflect
Feit Electric ESL85T/D 300w-EQ CFL – http://geni.us/feitesl85t
Albott 70″ Tripod/Monopod – http://geni.us/bi0OLa
Cowboy Studio Lighting Stands – http://geni.us/7ftlightstands
Sutefoto S40 Handheld Stabilizer – http://geni.us/wJfr
Polaroid AC Power Adapter Kit – http://geni.us/acke8
Neewer Scissor Arm Microphone Stand – http://geni.us/micscissorarm
20 Foot Microphone Cable – http://geni.us/20ftmiccable
Neewer 6 inch Pop Filter – http://geni.us/micpopfilter
Lightdow Grey Card – http://geni.us/greyreflector
LP-E8 2 pack replacement batteries for Canon T5i – http://geni.us/5XYq
MUSIC
———–
HOME – Resonance
#IMDN #IMMODDERNATION #858D
The offset on that air dial, holy balls xD I’ve had the KMoon 858D for a few years now, served me well thus far 🙂
STUPID LOUD MUSIC!! HEADPHONE USERS BEWARE!!!
I have one. I believe it’s temp is under rated. I go all the way up to 500 and seems good then. probably 400
The temperature indicated on 858D is in degree CELCIUS not Fahrenheit! You can fry the circuitboard by mistaking it as fahrenheit
Those helping hands are horrible. There are better options available like the Omnifixo.
Good video dude but can I suggest something shit can the music during the video way too loud. Its ok during the intro but after that shit can it
One "trick" that makes desoldering a little easier if you use solder wick / desoldering braid:
Cut yourself small pieces (maybe half an inch or 3/4") off the reel and hold them in place with tweezers. Discard once saturated.
If you keep the entire roll of desoldering braid attached, you have one huge hunk of copper there that will suck the heat away from your soldering iron quicker than anything. Depends on your iron of course.
@ImmodderNation 5:41 R;y,. you said so? I don’t think so, i own this hotair and it has issues with heat- hungry mobos… Sometimes I have to crank up temp. up to 410 degree C and wait 2-3 mins to remove the component, especially QFN with thermalpad…
I wonder if the 858D and the 898D rework stations are basically the same? There’s another video showing an 898D that burnt up. But, the reviewer did say that he used it for years with no problems. And I see that Amazon has dropped the price on the 858D from $ 89.99 to $ 39.99. At that price – WHO CARES as long as you can get a few years work out of it.
I have the LRT station with both heat gun and iron. Your video helped me conclude that it was not functioning correctly and it needed calibration. Brand new out of the box was low by 100 C. and since it only goes to 450 I was only hitting 350!! destroy 2 test chips before I figured it out. LRT 8586D. Once it was callibrated it poped the chips off like a pro!! Saved 50GB of my grandkids pics from the beginning of their lives. PRICELESS video my friend. Your video assured me that my device should be able to do the job and something else was wrong. THANKS AGAIN
Hi Sir, Good Morning or Good Evening, Can You teach me how to use a Hot Air Gun Rework Station(I have 958D hot air gun), to any components. Like what temp. Or what air flow??!
Thank you
Thankyou sir.a most exelkent video.clear and concise video.the best video.ive seen so far at last simeone thats actually gave guide to properly work by.thankyou so much indeed.
300 deg F? The display in in deg C!
Nice share. I like using cheap tool set too.
As a total newbie in the world of soldering, thank you for this review. Also I would like to thank people commenting tips&tricks!
Or you can use solder wick
How much do they cost?
This video saved a 4tb hard drive! Got a cheap station off ebay and a few parts, fixed the hard drive in like 5 minutes. Don’t plug hard drives into the orange sata ports on supermicro motherboards lol
Get rid of that Red weller soldering station. Its the worst soldering Iron i ever own.i have trow it in trash after i brough the t12 soldering station from aliexpress. Its changed my life. Literally.
as an engineer, it hurt when he kept calling it "PRINT circuit board" lol
useful footage starts around
https://youtu.be/uatSNV9PNDo?t=178
you are welcome
Paul Daniels has left the chat
Will this take off the analog sticks on a Sony ps5 controller?
Camera focus.
Hi Quality Glass Epoxy Cicuit Boards are tough to remove components without removing the trace.
I just picked this up. Thanks for the vid
Bro your video was using Amazon to sale this product 😅😂
what is minimum air position
Can this go down to 170 – 200 degrees?
Can you desolder components directly from large graphics card as GTX8800 using this hot air station without any bottom preheating?I would like to see this hard kind of tests.If it can does then its worth its money.
interesting.
Metcal MX-5220
How can I trust someone’s tips when their soldering iron’s tip is dirty as hell?
3:10 Not 300 Farenheit its 300 celsius or more, 400 recomended.
Make sure your using helping hands when your on top of very flammable cardboard lol
You did very well in your explanation. You know what you are talking about! I have been a Commercial TV High Technical Maintenanace Engineer for over 15.5 years +, I have done so much repair work on Sony. Ampex and Hitachi Tape Machines and Cameras back in the early 1980’s. I wish this was available back then when TV was still just analog. Nice to see a young person take such an interest in this. Great Presentation! Keep up the Good work!
Nice video Just a tip Put some heatstrink over the pcb holder clamps You can scratch and destroy pcbs bcz the metal teeths are pretty sharp Good luck!
Superfluous? I think you mean ubiquitous.
Where’s the Mod ?
I never considered using a heat station to remove a through-hole component. you risk removing a vital through-hole via in the process.
Really rubbish
but what if your solder iron can go up to 450celcius and the hot air rework also 450celcius wont that make the hot air not necessary in that case? since to remove the solder connection of cold joint you can still used back the solder iron to melt the join, and the components can dry off by air dried, so in this case theres no need for hot air rework then?
Yawn…..Moving on
Soldering iron is single target, Hot air gun is AoE.
Try a solder vacuum, save on solder braid
*Louis Rossmann Has left the chat.*
If I hadn’t to remove the excess solder first, it would be great. But this way, nah.
Anyway, good vid!
nice
Hi Sir, I am your new Subscriber, Can I ask a favor, How to use a Gordak 968D Digital Hot Air Rework Station??
Thank you
keep on going, you can do better